Seed treatments are valuable, he says. “You can’t live without them, but they don’t always hold thrips injury below the threshold level. We’ve got Gaucho, which is imidacloprid, and Cruiser, which is thimethoxan.
Certain weather conditions sometimes will favor one of those over the other. For example, Cruiser is a little bit more water-soluble than Gaucho. So Cruiser will perform better in a dry spring while Gaucho will perform better in a wet spring like last year.”
Acetate, including Orthene and the generics, at 1 pound in-furrow is not nearly as effective as a seed treatment and sometimes not much more effective than an untreated seed alone, says Smith.
“We have imidacloprid in a liquid, which is Admire Pro and is applied in-furrow. It can be as effective as a seed treatment, but the application method appears to be a critical limiting factor. It definitely wasn’t as good as a seed treatment. Most of us were putting it out with a flat-fan nozzle sprayed right in the furrow, and it didn’t help at all. It looked good with folks who did it with a .55 orifice nozzle pointed directly down with low pressure right above the furrow. It was equal to the seed treatments.”
Foliar sprays are needed on top of seed treatments when cotton is not growing rapidly, says Smith. “We’re now recommending that cotton planted up to about May 10 should get an automatic spray on top of the seed treatment at the first true-leaf stage.”
The "Cadillac" of cotton foliar sprays
There are a number of options available as far as foliar sprays, he says. “The Cadillac product in my opinion as far as being effective throughout the entire production season is Orthene or a generic acetate material. At 3 to 6 ounces per acre, nothing is better. Radiant, at 1 ½ to 3 ounces is also very effective. It’ll cost a little more, but its particular advantage is that it doesn’t flare spider mites like acetate or Orthene.”