Every year, incidents of combine fires during the harvest season are reported. According to a study conducted out of nearly 9,000 grain combine fires in the U.S., the majority (41.3%) were caused by crop residue. The accumulation of crop residue and dust on engines and in cracks and crevices of the combine contributes to the risk of fire. To reduce this risk, farmers should focus on three key aspects: prevention, preparation, and practicality.
Prevention:
Keep the combine clean by power washing to remove grease, oil, and crop residue. Use leaf blowers to clear chaff, leaves, and other crop materials from bearings, belts, and moving parts.
- Eliminate potential heat sources such as exposed electrical wiring, worn bearings, belts, and chains. Regularly check these areas and make necessary repairs.
- Use an infrared thermometer to monitor temperatures. Bearings and belts above 180 degrees Fahrenheit can cause damage, and temperatures reaching 300 degrees Fahrenheit require immediate shutdown.
- Avoid parking a hot combine in sheds or shops to prevent potential flare-ups.
- Inspect electrical lines for bare wires, rodent damage, rubbing, or insulation melting. Use heat-resistant insulation and consider using a chain to discharge static electricity.