Corn Stover Removal: Nutrient Value Of Stover And Impacts On Soil Properties

 

 

 

 

 

Corn residue can be viewed from many perspectives, including as

With downed corn ears common in many areas and able to be raked up and baled with residue, we’ve received questions on the nutrient value of the residue (stover). Some have also asked about how to estimate the total residue produced by a corn crop. Grain yield is related to residue production. For every 40 bu/ac of corn produced (56 lbs at 15.5% moisture), 1 ton of residue (at 10% moisture) is produced.  For example, a 240 bu/ac field will produce approximately 6 tons of residue while a 120 bu/ac field will produce approximately 3 tons of residue.

 

Nutrient value can depend on the season, management practice, time of harvest, location, and what part of the plant is being removed. For example, more nutrients are concentrated in leaves and husks than in the stalks. Per ton of dry harvested corn or sorghum residue, average nutrient concentrations include 17 lbs of nitrogen, 4 lbs of P2O5, 34 lbs of K2O, and 3 lbs of sulfur. Multiplying these nutrient values in pounds per ton by current fertilizer prices in dollars per pound gives the value of nutrients in the residue based on dollars per ton of residue removed.

 

Nutrient amount (lbs/ton) x fertilizer price ($/lb) = Value of Nutrients in Stover ($/ton)

 

Calculate the value of each nutrient and then total these values for total nutrient value. Of note, this formula takes into account the full fertilizer value of the nutrients removed.  However, if the soil has adequate capacity to supply some nutrients (such as potassium in Nebraska), the value of removed nutrients may be less (from 0-50% of fertilizer value). 

 

Also consider that positively charged ions in calcium, magnesium, and potassium help neutralize soil acidity. Removing them through residue harvest may mean lime will eventually be needed. Harvesting 1 ton of corn residue removes cations equivalent to 35 lbs of lime. If lime is worth $40/ton, $0.70 should be added to the value of crop residue.

 

Additional values to the residue come from potential soil loss due to wind and/or water erosion, any potential yield loss (link to other CW article), any increased irrigation due to evaporative losses, and the cost of raking/baling/transporting residue.

 

Retaining an average of 2.4 tons/acre annually is suggested for maintenance of soil organic carbon. If there is moderate to high risk of wind or water erosion, much more should be retained, especially with if tillage is practiced.

 

Regarding soil losses due to water erosion, additional studies in Gage, Sherman, and Chase counties in Nebraska looked at tillage, soil type, and terrace effects on the amount of residue that could be removed to maintain less than 5 tons/acre/year soil erosion from water for silt loam and silty clay loam soils. The research found that no residue could be removed if the land is tilled by disking unless the field is terraced, had 2% slope (but not 5% or greater), and yielded greater than 150 bu/ac. Fields that were no-tilled and terraced even up to a 10% slope could have residue removed and still maintain less than 5 tons/acre/year water erosion. Another study found that ground covers of 30% and 60% were estimated to be sufficient to reduce wind erosion by 70% and 90% respectively compared to bare soil.

 

By totaling the value of these factors ? nutrients removed, lime equivalent value, yield loss, soil loss from wind and water erosion, any increased irrigation, and raking/baling/transportation ? you can estimate the cost of crop residue harvest in dollars per ton. Impacts of stover removal on the subsequent crop yield can be viewed in this CropWatch article, Crop Residue Removal: Impacts on Yield